• Turning big ideas into great products
  • 022-68470000
  • Since
  • 1967
Get a Quote

Wave Washers For Bearings

  • Home
  • Products
  • Wave Washers
Belleville Washers

Introduction of Wave Washers For Bearings :

International Springs Wave washers are as per DIN 137 & DIN 6904. International Springs Wave Washers are made from prime Quality Spring Steel. Stainless Steel and Copper are also available in standard sizes. Wave Washers are positioned underneath a nut, an axle bearing, or a joint, to reduce friction, avoid leakage, isolate, stop loosening or distribute pressure

Belleville Washers are High Stressed Components and cannot be used for Dynamic Load and infrequent varying load applications. The force given in the table below is approximate.

Material :

Prime Quality Spring Steel, Stainless Steel. Other Special material are available on request.

Finish :

Natural, Phosphated and Oiled.

Wave Washers
Part No. Bearing Type Dimensions (mm) Load (N) Compressed Height 'H' at Load
De di t (+/-0.1)
WB-312604 6201 31.50 26.90 0.4 70.60 - 105.90 1.50
WB-383304 6203 39.00 33.50 0.4 98.10 - 147.10 1.50
WB-453905 6204 46.00 40.00 0.5 117.70 - 147.10 1.50
WB-494005 6205 / 6304 50.00 41.00 0.5 247.20 - 223.70 2.50
WB-596005 6206 / 6305 60.30 50.30 0.5 176.60 - 264.90 2.00
WB-696005 6306 70.00 60.50 0.5 176.60 - 264.90 2.00
WB-776905 6308 78.00 70.00 0.5 235.40 - 353.20 2.50
WB-877705 6308 87.50 78.00 0.5 235.40 - 353.20 2.00
WB-998108 6309 99.70 82.00 0.8 266.80 - 400.20 2.00
WB-1098908 6310 / 6212 109.50 90.00 0.8 294.30 - 441.20 3.75
WB-1199908 6213 120.00 100.00 0.8 318.80 - 637.60 2.50
WB-12210508 6214 123.50 105.50 0.8 343.30 - 686.70 3.00
WB-15713409 6315 / 6218 158.50 135.50 0.9 441.40 - 882.90 3.00
WB-16814009 6318 / 6219 169.00 140.50 0.9 466.00 - 931.90 3.00

Request Quote